Page 21 of 88
Channel Parameter Copy
The channel mode provides the opportunity to copy the value of a single channel parameter from one
channel to another (or to several channels) of the same device.
Push the c hannel s elect button (SEL) of the designated channel (e.g. most left-hand channel [1]). A d-
just the designated parameter to the desired value (e.g. MUTE on) by using t he respective button un-
derneath the MUTE display.
Afterwards push and hold both buttons underneath the MUTE display [2 & 3] until the display flashes
while still holding the SEL button [1].
As soon as the display starts flashing the SEL button [1] can be released while still holding the t wo
buttons of the MUTE dis play [2 & 3].
Now the value (MUTE
O
OO
On
nn
n
) can be c opied to any other channel of the device by simply pushing t he
SEL button ([4], [5], [6], [7], [8], [9], [10]) of the channel the paramet er shall be copied to. At each push
of a SEL button the MUTE display will show the two horizontal bars (
--
--
--
--
) to indic ate the successful
copy of the value.
After the copy is finished release all buttons.
The copy function works for all channel parameters:
-
MUTE,
-
GAIN,
-
PHANTOM,
-
CLIP LEVEL
Only one parameter can be copied at a time.
USO
RESTRITO
