Ricon B156, Service Manual

Page: 653 / 781

SERVICE PROGRAM MODE
SM 39 B750
Fax Op
tion
Type 32
32
B75
0
2
Mode No. Function
002 G3-2 Memory Dump Print out RAM data for the optional SG3
board.
003 G3-3 Memory Dump Print out RAM data for the optional SG3
board.
102
004 G4 Memory Dump Print out RAM data for the SiG4 board.
G3-1 NCU Parameters 103
001 – 023 CC, 01 – 22 NCU parameter settings for the standard
G3 board.
Section 4.3 NCU Parameters
G3-2 NCU Parameters 104
001 – 023 CC, 01 – 22 NCU parameter settings for the optional G3
board.
Section 4.3 NCU Parameters
G3-3 NCU Parameters 105
001 – 023 CC, 01 – 22 NCU parameter settings for the optional G3
board.
Section 4.3 NCU Parameters
SP3-XXX (Tel Line Settings)
3
Mode No. Function
Service Station
001 Fax Number Enter the fax number of the service station.
101
002 Select Line Select the line type.
Serial Number 102
000 Enter the fax unit’s serial number.
PSTN-1 Port Settings
001 Select Line Select the line type setting for the G3-1 line.
If the machine is installed on a PABX line,
select “PABX”, “PABX(GND)” or
“PABX(FLASH)”.
002 PSTN Access Number Enter the PSTN access number for the
G3-1 line.
103
003 Memory Lock
Disabled If the customer does not want to receive
transmissions using Memory Lock on this
line, turn this SP on.
PSTN-2 Port Settings
001 Select Line Select the line setting for the G3-2 line. If
the machine is installed on a PABX line,
select “PABX”, “PABX(GND)” or
“PABX(FLASH)”.
002 PSTN Access Number Enter the PSTN access number for the G3-
2 line.
003 Memory Lock
Disabled If the customer does not want to receive
transmissions using Memory Lock on this
line, change this SP to on.
104
004
Transmission
Disabled If you turn this SP on, the machine does not
send any fax messages on the G3-2 line.