Ricon B156, Service Manual

Page: 669 / 781

BIT SWITCHES
SM 55 B750
Fax Op
tion
Type 32
32
B75
0
I-fax Switch 01 SP No. 1-102-002
7 mm/inch
This setting selects mm/inch conversion for mail transmission.
0: Off (No conversion), 1: On (Conversion)
When on (set to “1”), the machine converts millimeters to inches for sending mail.
There is no switch for converting inches to millimeters.
NOTE: Unlike G3 fax transmissions which can negotiate between sender and receiver
to determine the setting, mail cannot negotiate between terminals; the
mm/inch selection is determined by the sender fax.
When this switch is Off (0):
•
Images scanned in inches are sent in inches.
•
Images scanned in mm are sent in mm.
•
Images received in inches are transmitted in inches.
• Images received in mm are transmitted in mm.
When this switch is On (1):
•
Images scanned in inches are sent in inches.
•
Images scanned in mm are converted to inches.
•
Images received in inches are transmitted in inches.
Images received in mm are converted to inches.
I-fax Switch 02 SP No. 1-102-003
No FUNCTION COMMENTS
RX Text Mail Header Processing 0
This setting determines whether the header information is printed with text e-mails
when they are received.
0: Prints only text mail.
1: Prints mail header information attached to text mail.
•
When a text mail is received with this switch On (1), the “From” address and
“Subject” address are printed as header information.
•
When a mail with only binary data is received (a TIFF-F file, for example), this
setting is ignored and no header is printed.
Output from Attached Document at E-mail TX Error 1
This setting determines whether only the first page or all pages of an e-mail
attachment are printed at the sending station when a transmission error occurs. This
allows the customer to see which documents have not reached their intended
destinations if sent to the wrong e-mail addresses, for example.
0: Prints 1st page only.
1: Prints all pages.