Ricon B156, Service Manual

Page: 363 / 781

USING THE DEBUG LOG
SM 5-135 B156/B220
Service
Tables
5.10.4 NEW DEBUG LOG CODES
SP5857-015 Copy SD Card-to-SD Card: Any Desired Key
This SP copies the log on an SD card (the file that contains the information written
directly from shared memory) to a log specified by key number. The copy operation
is executed in the log directory of the SD card inserted in the same slot. (This
function does not copy from one slot to another.) Each SD card can hold up to 4
MB of file data. Unique file names are created for the data during the copy
operation to prevent overwriting files of the same name. This means that log data
from more than one machine can be copied onto the same SC card. This
command does not execute if there is no log on the HDD for the name of the
specified key.
SP5857-016 Create a File on HDD to Store a Log
This SP creates a 32 MB file to store a log on the HDD. However, this is not a
completely empty file. The created file will hold the number “2225” as the SCS key
number and other non-volatile information. Even if this SP is not executed, a file is
created on the HDD when the first log is stored on the HDD, but this operation
takes time. This creates the possibility that the machine may be switched off and
on before the log can be created completely. If you execute this SP to create the
log file beforehand, this will greatly reduce the amount of time required to acquire
the log information and save onto the HDD. With the file already created on the
HDD for the log file, the data only needs to be recorded; a new log file does not
require creation. To create a new log file, execute SP5857-011 to delete the debug
log data from the HDD and then execute this SP (SP5857-016).
SP5857-017 Create a File on SD Card to Store a Log
This SP creates a 4 MB file to store a log on an SD card. However, this is not a
completely empty file. The created file will hold the number “2225” as the SCS key
number and other non-volatile information. Even if this SP is not executed, a file is
created on the SD card when the first log is stored on the SD card, but this
operation takes time. This creates the possibility that the machine may be switched
off and on before the log can be created completely. If you execute this SP to
create the log file beforehand, this will greatly reduce the amount of time required
to acquire the log information and save onto the SD card. With the file already
created on the SD card for the log file, the data only needs to be recorded; a new
log file does not require creation. To create a new log file, execute SP5857-012 to
delete the debug log data from the SD card and then execute this SP (SP5857-
017).