Ricon B156, Service Manual

Page: 262 / 781

SERVICE PROGRAM MODE
B156/B220 5-34 SM
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
4 Low Call Mode Selects the alarm mode.
[0
∼
1 / 1 / 1 /step]
• 0: Normal Mode (CC Auto Call)
•
1: Reduce Mode (CC Manual Call)
When selecting 1 (reduce mode), SP5-508-011 through
-023 specify parameters (referred to as “P” in the
following descriptions). Alarms occur under the following
conditions:
• Continuous jam:
When paper jams occur P times consecutively, where
P can be between 2 and 10. The default for P is 5 (
SP5-508-012).
• Continuous door open:
When a door is left open for P minutes, where P can
be between 3 and 30. The default for P is 10 (
SP5-
508-013).
• Unremoved jam:
When a paper jam is left unremoved for P minutes,
where P can be between 3 and 30. The default for P
is 10 (
SP5-508-011).
11 Jam Detection: Time
Length
Specifies the unremoved jam timer ( SP5-508-004).
[3 ∼ 30 / 10 / 1 minute/step]
12 Jam Detection:
Continuous Count
Specifies the number of consecutive jams ( SP5-508-
004).
[2
∼
10 / 5 / 1 time/step]
13 Door Open: Time
Length Specifies the continuous door open timer ( SP5-508-
004).
[3
∼
30 / 10 / 1 minute/step]
508
21 Jam Operation: Time
Length Selects how the machine handles the unremoved jam
alarm.
[0
∼
1 / 1 / 1 /step]
•
0: Auto call
•
1: Beeper
If an unremoved jam occurs, a phone call is
automatically made when 0 (auto call) is selected. To
enable SP5-508-21 through -23, SP5-508-4 must be set
to 1.
22 Jam Operation:
Continuous Count
Selects how the machine handles the consecutive jam
alarm.
[0
∼ 1 / 1 / 1 /step]
•
0: Auto call
• 1: Manual Call
23 Door Operation: Time
Length Selects how the machine handles the continuous door
open alarm.
[0
∼
1 / 1 / 1 /step]
•
0: Auto call
•
1: Manual Call
ACC Factory Setting
4 Recall Recalls the ACC factory settings.
5 Overwrite Overwrites the ACC factory settings with the current
settings.
610
6 Previous Setting Recalls the previous ACC settings.