Ricon B156, Service Manual

Page: 639 / 781

ERROR CODES
SM 25 B750
Fax Op
tion
Type 32
32
B75
0
Code Meaning Suggested Cause/Action
14-00 SMTP Send Error Error occurred during sending to the SMTP server.
Occurs for any error other than 14-01 to 16. For
example, the mail address of the system
administrator is not registered.
14-01 SMTP Connection Failed Failed to connect to the SMTP server (timeout)
because the server could not be found.
•
The IP address for the SMTP server is not stored
in the machine.
•
The DNS IP address is not registered.
•
Network not operating correctly.
•
Defective PC that does file transfer
14-02 No Service by SMTP
Service (421) SMTP server operating incorrectly.
14-03 Access to SMTP Server
Denied (450) Failed to access the SMTP server because the
access is denied.
•
SMTP server operating incorrectly
•
Defective PC that does file transfer
14-04 Access to SMTP Server
Denied (550) SMTP server operating incorrectly
14-05 SMTP Server HDD Full
(452) Failed to access the SMTP server because the HDD
is full.
• SMTP Server hard disk full.
• Insufficient HDD space in the PC that does file
transfer
14-06 User Not Found on SMTP
Server (551) The user does not exist locally.
14-07 Data Send to SMTP Server
Failed (4XX) Failed to access the SMTP server because the
transmission fails.
•
SMTP server operating incorrectly
•
Defective PC that does file transfer
14-08 Data Send to SMTP Server
Failed (5XX) Failed to access the SMTP server because the
transmission fails.
•
SMTP server operating incorrectly
•
Defective PC that does file transfer
14-09 Authorization Failed for
Sending to SMTP Server •
POP-Before-SMTP or SMTP authorization failed.
•
Incorrect setting for file transfer
14-10 Addresses Exceeded
Number of broadcast addresses exceeded the limit
for the SMTP server.
14-11 Buffer Full The send buffer is full so the transmission could not
be completed. Buffer is full due to using Scan-to-
Email while the buffer is being used send mail at the
same time.
14-12 Data Size Too Large Transmission was cancelled because the detected
size of the file was too large.
14-13 Send Cancelled Processing is interrupted because the user pressed
Stop.