Ricon B156, Service Manual

Page: 291 / 781

SERVICE PROGRAM MODE
SM 5-63 B156/B220
Service
Tables
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
Proc Cont Cnter (Process Control Counter) 908
Proc Cont Cnter Displays the process control counter.
[0 ~ 9999999 /
0 / 1 sheet/step]
Proc Cont Reset (Process Control Reset) 909
Proc Cont Reset Resets the process control counter.
Oil Cnter (Oil Counter) 913
Oil Cnter Displays the oil supply unit counter.
[0 ~ 65535 /
0 / 1 sheet/step]
Oil Cln Cnt Rst (Oil Clean Counter Reset) 914
Oil Cln Cnt Rst Resets the oil cleaner counter.
Proc Error Log (Process Error Log)
1 Log 1
2 Log 2
915
3 Log 3
Displays the latest three process control error logs.
The following are the error codes:
Development unit initial settings errors:
• 110: Incorrect image detected by cyan ID sensor
•
116: Incorrect image detected by magenta ID
sensor
•
118: No black image
Development bias settings errors:
•
113: Incorrect image detected by cyan ID sensor
•
114: Incorrect image detected by magenta ID
sensor
• 115: Incorrect image detected by yellow ID sensor
•
123: Incorrect image detected by black ID sensor
ID sensor errors:
• 103: ID sensor error
•
104: ID sensor unable to detect image
• 105: OPC belt not detected
Machine Counter 920
Machine Counter [0 ~ 0xFFFFFFF / 0 / 1 /step]
Machine Cnt Clr (Machine Counter Clear) 921
Machine Cnt Clr Clears the machine counter.
Toner End Cnter (Toner End Counter)
1 K Toner
2 C Toner
3 M Toner
922
4 Y Toner
Displays the toner end counter, which indicates the
possible print count after a toner near end.
Toner End Cnt Clr (Toner End Counter Clear)
1 K Toner
2 C Toner
3 M Toner
4 Y Toner
923
100 All
Clears the toner end counter (SP7-922).
The machine goes back to the normal operation mode if
the toner end counter is cleared.
Charger Cln Cntr (Charger Clean Counter) 924
Charger Cln Cntr Displays how many times the charge corona wire has
been cleaned.
[0 ~ 9999999 /
0 / 1 sheet/step]
SP7-926 resets the counter.