Ricon B156, Service Manual

Page: 265 / 781

SERVICE PROGRAM MODE
SM 5-37 B156/B220
Service
Tables
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
NV-RAM Data Upload 824
NV-RAM Data Upload Use this to copy NVRAM data from the machine to an
SD card.
NV-RAM Data Download 825
NV-RAM Data
Download
Imports data from an SD card to the NVRAM.
When data has been normally imported into the
NVRAM, a message appears on the operation panel.
After reading the message, turn the main power switch
off and on.
Network Setting
50 1284 Compatibility
(Centro) Validates/invalidates IEEE1284 compatibility.
[0 ~ 1 /
1 / 1 /step]
• 0: Invalidated
•
1: Validated
52 ECP (Centro) Validates/invalidates ECP.
[0 ~ 1 /
1 / 1 /step]
This SP is activated only when SP5828-050 is set to “1”.
• 0: Invalidated
•
1: Validated
65 Job Spooling Enables/disables Job Spooling.
[0 ~ 1 /
0 / 1 /step]
• 0: Disabled
•
1: Enabled
828
66 Job Spooling Clear:
Start Time Enables/disables Job Spooling Clear when the main
power turns on.
[0 ~ 1 /
1 / 1/step]
•
0: ON (Erases the spooled job in the HDD before the
main power is turned off.)
•
1: OFF (Prints the spooled job in the HDD before the
main power is turned off.)
69 Job Spooling
(Protocol) Enables/disables Job Spooling for each protocol.
[0 ~ 1 /
1 / 1/step]
• 0: Enables Job Spooling
•
1: Disables Job Spooling
Bit switch
Bit 0: LPR
Bit 1: FTP
Bit 2: IPP
Bit 3: SMB
Bit 4: BMLinks
Bit 5: DIPRINT
Bit 6: Reserved
Bit 7: Reserved
84 Printing Settings List Prints the settings list related to NCS parameters.
90 TELNET
(0: OFF 1:ON)
Turns on/ off TELNET.
[0 ~ 1 /
1 / 1 /step]
• 0: OFF
•
1: ON