Part IV Setting Parameters
BECS-09 Singular-head Computerized Embroidery Machine 37
Press“ ” to set the repetition interval. A cursor shows the place to
input.
Input the new X-direction interval value between -999.9 and +999.9(mm).
E.g. press "1" and "2" to set the value as +12( mm) and then press “ ” to
confirm. The system will show you to set the new Y-direction interval.
Parameter
Scale: X:120 % Y:160 %
Direction: b
Rot. Angle: 45
º
Rep. Prior: Y
Rep. Times: X: 3 Y: 2
R. Interval: X: +0.0 Y:+0.0
Offset Org: No
Cyclic Emb.: No
Work Sequence:
Parameter
Scale: X:120 % Y:160 %
Direction: b
Rot. Angle: 45
º
Rep. Prior: Y
Rep. Times: X: 3 Y: 2
R. Interval: X: +0.0 Y:+0.0
Offset Org: No
Cyclic Emb.: No
Work Sequence:
