Part VII Memory Design Operation
100 BECS-09 Singular-head Computerized Embroidery Machine
Set the letter design’s parameters. Press “
” to select items and press
“
” to set values. In the setting table, the measurement unit is percentage for
X/Y scales and (Satin Stitch) Density, mm for X/Y Space, degree for Angle. After
setting, press “ESC” to enter the next step.
When “Arc” is selected for “Arrange”, the computer will ask to input the
parameters for the arc, including the coordinates of the start, middle and end
points. Then press “ESC” to enter the next step. If it’s not “Arc”, omit this step.
The design’s outline is displayed in the screen as follows. The user can
adjust the design’s positions, fonts, angles and scales according to the prompts on
the left. Then press “ESC” to end the operation.
