Part II Control and Basic Operations
BECS-09 Singular-head Computerized Embroidery Machine 9
repetition (normal repetition) it shows “
”
I:
It shows the special operations or causes of machine stop during
embroidery.
“
” It comes to the stitch skip codes during embroidery.
“
” It comes to the color change codes during embroidery.
“
” Embroidery comes to an end.
“
” The machine returns to the start point.
“
” The machine stops because thread break is detected during
embroidery.
“
” The machine stops because the stop button is pressed.
“
” The machine stops after it returns and then patching embroiders
to the thread break point.
The following items are also shown in the main screen:
1. Design number:
it’s the number of the memory-stored design (like "#01"
in the above picture), which is ready for embroidery immediately after start-up.
The user can select another design number by entering design operation (press
“
” to enter it). And the system will remind the user whether to renew the
current one after inputting a new design from the disk (press “
” to enter the
disk operation).
2. Stitches:
There are "11791" stitches for the #01 design in the above
