Part IV Setting Parameters
28 BECS-09 Singular-head Computerized Embroidery Machine
Part IV Setting Parameters
4.1 Parameter Menu
Under the embroidery preparation mode and embroidery confirmation
mode, you can enter the parameter menu. Some options in it are unavailable in
certain cases, when they are displayed in darkness.
The parameters (except the 7
th
and 8
th
) in the first page are set and stored
with each design separately.
Operation:
Press "
"to enter the parameter setting menu. Or after you select the
design for embroidery and confirm you can enter the parameter menu under the
mode "
". The first page of the menu is as follows:
You can switch between the two pages of parameter menu by pressing
Parameter
Scales: X:100 % Y:100 %
Direction: P
Rot. Angle: 0
Rep. Prior: X
Rep. Times: X: 1 Y: 1
R. Interval: X: +0.0 Y:+0.0
Offset Org: NO
Cyclic Emb: NO
Work Sequence:
