Part IV Setting Parameters
BECS-09 Singular-head Computerized Embroidery Machine 53
effective at the next power-on.
Rope Embroidery: (Options: Yes, No)
Set this parameter as “Yes” to enable rope embroidery in the machine
equipped with rope embroidery devices. Set it as “No” to close this function.
4.10 Common Parameters
Auto Back Origin: (Options: Yes, No)
When this parameter is set as “Yes”, there will appear at the end of
embroidery a prompt “Return to start point or offset point, press any key to
continue”. If press a key and the frame hasn’t been at the origin point, the frame
will return to the origin point.
Overframe By Step: (Options: Yes, No)
It is to decide whether to do over-frame directly or by step in case of jump
Common Parameter
Auto Back Origin:
Yes
OverFrame By Step: No
OverFrame Speed
Slow
Fast Manual Frame: 5
Slow Manual Frame: 5
StopToColor @ Read: No
Save To Work Order:
No
