Part II Control and Basic Operations
BECS-09 Singular-head Computerized Embroidery Machine 11
—
Design operation
This is for all the operations concerning the design (files/data), including
selecting design, memory-stored design display, inputting design from floppy
disk, editing batch design, clearing all designs,
deleting/copying/combining/dividing memory-stored design, renaming design
file, expanding satin and create letter design. Please read Part VII.
—
Parameter operation
It’s for parameter setting and has two pages. One is for design parameter
operations, including scaling up/down, design direction, rotation angle,
repetition priority, repetition times, repetition interval, offset origin, cyclic
embroidery and work sequence. The other page is for standard data, trim and
machine parameters, and common parameters. The user can select any of them
to enter the next level of menus for setting. Please refer to Part IV.
—
Manual operation
This key is for all manual operations, including showing frame operations
and positioning floating, etc. Please refer to Part V for details.
—S
witch key for working methods
Press this key to switch between “manual color change and startup”
(without application of work sequence) and “embroidering in the set work
sequence”. When the machine embroiders in the set work sequence, the
