T
echnical
B
ulletin
PAGE: 6/6
Model:
General
Date:
23-Jan-06
No.:
RGene021
If the ROM numbers are not the same, or the version numbers are not the same, this
means the unit was not installed correctly.
If this happens:
Make sure the MFP model and unit type match (Type C or D).
For this information, see pg. 1 of this RTB.
If they do not match:
1) Replace the NV-RAM
2) Replace the “Data Overwrite Security Unit” (SD card) with the correct type
3) Do the installation procedure in this RTB again, from Step 1.
13. Turn “Auto Erase Memory Setting” ON:
User Tools >> System Settings >> Administrator Tools >> Auto Erase Memory Setting
>> ON
14. Exit User Tools.
15. Make sure the overwrite erase icon [C] is displayed on the operation panel.
If it is not displayed, do Step 7 again.
16. Make a sample copy.
17. Make sure the overwrite icon changes as follows:
•
The bottom of the icon (white part) becomes thicker [D].
•
“Next Copy” is displayed for a short time under the icon.
The icon returns to its usual shape [E].
[D]
[E]
Copies
Total
Origi
.
0
1
0
09/09/2003 14:13
[C]
