15/19
9. Attach the clamps [A] and put the
harness inside the clamps.
10. Connect the flat cable [B] with the
blue side outside to the FCU as
shown.
11. Attach the FCU [C] to the BICU (
x 4).
NOTE:
Make sure that the jumper
switch on the MBU is set to
"On".
12. Press down the MBU.
NOTE:
Make sure that the MBU is
seated correctly. If not, SC
occurs (SC819, SC672 etc.).
13. Remove the speaker assembly [D]
(
x 2) if the speaker assembly has
been installed.
1
2
B751I102.WMF
B751I103.WMF
B751I502.WMF
[C]
[D]
[A]
[B]
