Ricoh MP CW2200, User Manual

Page: 36 / 220

3. Press the [Program] key.
CQJ005
4. Press [Program].
5. Press the program number you want to register.
6. Enter the program name.
7. Press [OK].
8. Press [Exit].
• You can enter up to 34 characters for a program name.
• When a specified program is registered as the default, its values become the default settings, which
are displayed without pressing the [Program] key, when modes are cleared or reset, and after the
machine is turned on. See "Changing the Default Functions of the Initial Screen", Convenient
Functions .
• If the paper input location you specified in a program runs out of paper and an another paper
input location is configured with the same size of paper, the paper input location will automatically
switch to the other.
• Programs are not deleted by turning the power off or by pressing the [Reset] key unless the
program is deleted or overwritten.
• Program numbers with next to them already have settings made for them.
2. Getting Started
34