Ricoh M199 Service Manual Download Page 145

Page: 145 / 218

Firmware Updating

M199/M200/M203/M204

4-30

11. Close the top cover.

12. Turn off the power of the machine, and then turn it back on.

13. Print a configuration or maintenance page to check the machine's firmware version.



Do not turn off the machine until the update completion message appears on the

machine’s control panel. Otherwise, the controller board will be damaged.



If the update completion message does not appear, the download failed. Try again. You

can also switch from an Ethernet connection to a USB connection and see if that works. If

you still cannot download the firmware, it may be necessary to change the EGB and/or

the controller board.



If power failed during the download, try again. If you still cannot download the firmware, it

may be necessary to change the EGB and/or the controller board.

4.3.4 BOOT LOADER FIRMWARE

This is also listed on the configuration page, but this firmware is not updated in the field.

Summary of Contents for M199



























































































































































































































Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands

Ricoh M199, Service Manual

Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands