Ricoh M199 Service Manual Download Page 13

Page: 13 / 218

Symbols, Abbreviations and Trademarks

This manual uses several symbols and abbreviations. The meaning of those symbols and

abbreviations are as follows:

Clip ring

Screw

Connector

Clamp

E-ring

SEF

Short Edge Feed

LEF

Long Edge Feed

[A] Short Edge Feed (SEF)

[B] Long Edge Feed (LEF)

Trademarks

Microsoft

, Windows

, Windows Server

, Windows Vista

, and Internet Explorer

are either

registered trademarks or trademarks of Microsoft Corporation in the United States and/or other

countries.

The proper name of Internet Explorer 6 is Microsoft

Internet Explorer

Adobe, Acrobat, PostScript, and Reader are either registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or other countries.

PCL

is a registered trademark of Hewlett-Packard Company.

Other product names used herein are for identification purposes only and might be trademarks of

their respective companies. We disclaim any and all rights to those marks.

Summary of Contents for M199



























































































































































































































Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands

Ricoh M199, Service Manual

Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands