Ricoh M199 Service Manual Download Page 143

Page: 143 / 218

Firmware Updating

M199/M200/M203/M204

4-28

4.3.3 UPDATING THE ENGINE FIRMWARE

When updating firmware, always disconnect any other cable(s) than the one being used for the

update operation.

1. Download the firmware files to your computer.



FwUpdateToolSP.exe (Service mode execute file)



Setting.ini (Parameter setting)



yyy.bin (Engine Firmware)

2. Make a folder on a local drive of your computer and save the files there.

3. Turn the machine on.

4. Connect the computer and the machine through a network or directly by USB.

5. Open the top cover.

6. Double-click the "FWUpdateToolSP.exe" file to execute the updating program.

A dialog box with cautionary statements appears.

7. Read the cautionary statements carefully, and then click "OK".

The firmware update tool opens.

8. For a USB connection, click "Eng. F/W Update (USB)" [A].

For a network connection, enter the machine's IP address in "Machine IP" [B], and then click

"Eng. F/W Update (NET)" [C].

Summary of Contents for M199



























































































































































































































Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands

Ricoh M199, Service Manual

Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands