Ricoh M199 Service Manual Download Page 65

Page: 65 / 218

Image Transfer

M199/M200/M203/M204

3-38

After replacing the image transfer belt unit



Do the following step 2 with the front cover of the machine open.

1. Open the front cover and turn on the machine.

2. Execute "Reset Transfer Unit” with the "Engine Maintenance" menu.

3. Close the front cover.

4. Execute "Trans. Belt Adjust" with the "Engine Maintenance" menu.

5. Adjust the registration settings for each tray and for the front and rear sides of the

paper with the "Engine Maintenance" menu if necessary.

3.8.2 ITB (IMAGE TRANSFER BELT) CLEANING UNIT



The ITB cleaning unit contains waste toner. When removing the ITB cleaning unit, put it

on a sheet of paper.

1. Image transfer belt unit (page 3-37 "Image Transfer Belt Unit")

2. Left handle [A] (hook, bushing × 1)

3. Right handle [B] (hook, bushing × 1)

4. ITB cleaning unit [C] (

× 2)

Summary of Contents for M199



























































































































































































































Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands

Ricoh M199, Service Manual

Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands