Ricoh M199 Service Manual Download Page 19

Page: 19 / 218

Machine Overview

1-5

M199/M200/M203/M204

Inf

tio

1.1.3 DRIVE LAYOUT

1. Color AIO Motor

2. Black AIO Motor

3. Duplex Motor

4. Transport/Fusing Motor

5. Registration Clutch

6. Paper Feed Clutch

7. Agitator Motor

8. ITB (Image Transfer Belt) Contact Motor



Color AIO Motor:

This drives the color AIOs (Cyan, Magenta and Yellow)



Black AIO Motor:

This drives the black AIO and the ITB (Image Transfer Belt).



Duplex Motor :

This drives the paper exit roller and the duplex roller.



Transport/Fusing Motor:

This drives the fusing unit, paper feed roller, registration roller and paper exit roller via the

paper feed clutch, registration clutch and gears.



Registration Clutch:

This transfers drive from the transport/ fusing motor to the registration roller.



Paper Feed Clutch:

This transfers drive from the transport/ fusing motor to the paper feed roller.

Summary of Contents for M199



























































































































































































































Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands

Ricoh M199, Service Manual

Search results

Summary of Contents for M199

Reviews:

Related manuals for M199

Brands by name

Popular brands