Ricoh M199, Service Manual

Page: 131 / 218

Service Menu
M199/M200/M203/M204 4-16 SM
Vert Bypass
Tray
Adjusts the vertical registration for the bypass tray.
If the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Horiz.Dup Back
Adjusts the horizontal registration for the back side
in duplex mode. If the machine settings are reset
to the factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Vert.Dup Back
Adjusts the vertical registration for the back side in
duplex mode. If the machine settings are reset to
the factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Counter Reset Resets counters to factory defaults.
Clear log Clears the error and the jam counter logs.
Reset Transfer Resets the transfer unit life counter.
Reset Fuser Resets the fusing unit life counter.
Reset 2nd Resets the 2nd transfer unit (transfer roller) life counter.
Maintenance ID
00* – 7F
Displays the current maintenance ID number.
Do not change this setting (Designed for Factory Use).
LSU Adjustment
Input 160 bytes
setting.
Character: alphanumeric "0-9", "a-f", "A-F", only
valid data can be input.
Input length: 160 bytes
Trans. Belt Adj
When you execute "Trans. Belt Adj", the transfer belt adjustment is
done. This calibrates the motor speed to match the length of the new
transfer belt.
Fuser SC Detect On/Off*
If On, the engine detects SC559. If Off, the engine
does not detect "Fusing SC Reset".
Fuser SC Reset Resets the Fusing related SC.
Color Regist
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.