manualshive.com logo in svg

Ricoh IS2022, Service Manual, Page: 238 / 313

Share
Download
Ricoh IS2022 Service Manual Download Page 238

10 August, 2001

USER TOOLS

4-75

Service

Tables

Copier/Document Server Features

In the User/Tools Counter display, press Copy/Document Server Settings.

Click a tab to display the settings. If the Next button is lit in the lower right corner,
press it to display more options. Perform the settings, press Exit to return to the
User Tools/Counter display, and then press Exit to return to the copy window.

Printer, Facsimile, Scanner Settings

In the User/Tools Counter display, press Printer Settings, Facsimile, or Scanner
Settings to open the appropriate screen and then click the tab to display more
settings. The screen below shows the Printer Features screen.

Inquiry

In the User/Tools Counter display, press Inquiry.

The following SP mode settings will be displayed.

•

  Service Telephone Number (SP5-812-1)

•

  Sales Telephone Number (SP812-4)

•

  Consumable Telephone Number (SP812-3)

•

 

Toner Name (SP-841)

B027S701.WMF

B027S705.WMF

Summary of Contents for IS2022


























































































































































































































































































































Reviews:

No comments