10 August, 2001
SERVICE PROGRAM MODE
4-11
Service
Tables
1
Mode Number/Name
Function/[Setting]
2nd Bottom Plate Pressure Re-adjustment
4
Small Size
Adjusts the upper paper lift motor forward rotation time
for paper of the same size as or smaller than the small
size threshold set with SP1-909-8. The motor rotates
forward when the remaining paper amount is lower
than the value of SP1-909-6.
Use this SP when a paper feed problem occurs when
paper in the 2nd paper tray is running low.
See “Paper Lift Mechanism” for details on SP1-909.
[
0
~ 2000 /
400
/ 1 ms/step]
5
Middle Size
Adjusts the upper paper lift motor forward rotation time
for paper sizes larger than the small size threshold set
with SP1-909-8, up to and including the middle size
threshold set with SP1-909-9.
The motor rotates forward when the remaining paper
amount is lower than the value of SP1-909-7.
If a middle size threshold is not stored with SP1-909-9,
this SP is not used.
Use this SP when a paper feed problem occurs when
paper in the 2nd paper tray is running low.
See “Paper Lift Mechanism” for details on SP1-909.
[
0
~ 2000 /
300
/ 1 ms/step]
2nd Paper Amount
6
Small Size
Selects the remaining paper amount limit for use with
SP1-909-4.
Set this SP to 2 or 3 when a paper feed problem
occurs before near-end.
See “Paper Lift Mechanism” for details on SP1-909.
[0 = None (Empty) /
1 = Near End
/ 2 = 25% / 3 = 75%]
7
Middle Size
Set this SP to 2 or 3 when a paper feed problem
occurs before near-end.
See “Paper Lift Mechanism” for details on SP1-909.
2nd Paper Size
8
2nd Small Paper Size
Setting
Selects the small size threshold for the 2nd paper tray.
“0” means that this setting is not used.
The size used by SP1-909 is determined by paper
width. See “Paper Lift Mechanism” for details on SP1-
909.
[0 = None (Not used) /
1 = HLT/A5
/ 2 = A4 / 3 = LT / 4
= DLT / 5 = A3]
909*
9
2nd Middle Paper Size
Setting
Selects the middle size threshold for the upper tray.
“0” means that this setting is not used.
The value must be larger than the small size threshold
(SP1-909-8). The size used by SP1-909 is determined
by paper width. See “Paper Lift Mechanism” for details
on SP1-909.
[
0 = None (Not used)
/ 1 = HLT/A5 / 2 = A4 / 3 = LT /
4 = DLT / 5 = A3]