10 August, 2001
SERVICE PROGRAM MODE
4-25
Service
Tables
2
Mode Number/Name
Function/[Setting]
Transfer Roller Cleaning
996*
Selects whether the transfer roller is cleaned before
each copy job.
Set this to ‘1’ when dirty background appears on the
reverse side of the first page of a copy job. However,
the first copy time will be longer.
If this SP is at 0, the transfer roller is never cleaned.
See ‘Detailed Section Descriptions – Transfer Roller
Cleaning” for more details.
[
0 = No
/ 1 = Yes]
997*
Vts Setting (Factory)
DFU
PCU Reverse Rotation Time
1
Wait Time
Adjusts the waiting time for starting to rotate the drum
in reverse after the end of each job.
The wait time calculation formula is as follows.
This value x 30 ms. 0: Reverses immediately after the
end of the job (no waiting)
[0 ~ 99 /
20
/ 1/step]
998*
2
Reverse Time
Adjusts the drum reverse rotation time.
The reverse rotation time calculation formula is as
follows.
This value x 30 ms. 0: No reverse at end of job
[0 ~ 99 /
1
/ 1/step]
Toner Control Data Display
999*
Displays the toner density control data on the debug
monitor.
DFU
[
0 = No
/ 1 = Yes]
SP4-XXX: Scanner
4
Mode Number/Name
Function/[Setting]
Main Scan Magnification (Scanner)
008*
Adjusts the magnification in the main scan direction for
scanning.
Use the
!
key to toggle b and – before
entering the value. The specification is
±
1%. See
“Replacement and Adjustment - Copy Adjustment” for
details.
[–0.9 ~ +0.9 /
0.0
/ 0.1% step]
Sub Scan Magnification (Scanner)
009*
Adjusts the magnification in the sub scan direction for
scanning.
Use the
!
key to toggle b and – before
entering the value. The specification is
±
1%. See
“Replacement and Adjustment - Copy Adjustment” for
details.
[–0.9 ~ +0.9 /
0.0
/ 0.1% step]