SERVICE PROGRAM MODE
10 August, 2001
4-26
4
Mode Number/Name
Function/[Setting]
Leading Edge Registration (Scanner)
010*
Adjusts the leading edge registration for scanning in
platen mode.
(–): The image moves in the direction of the leading
edge.
Use the
!
key to toggle b and – before
entering the value. The specification is 2
±
1.5 mm.
See “Replacement and Adjustment – Copy
Adjustment” for details.
[–0.9 ~ +0.9 /
0.0
/ 0.1 mm step
]
Side-to-side Registration (Scanner)
011*
Adjusts the side-to-side registration for scanning in
platen mode.
(–): The image disappears at the left side.
(+): The image appears.
Use the
!
key to toggle b and – before
entering the value. The specification is 2
±
1.5 mm.
See “Replacement and Adjustment - Copy Adjustment”
for details.
[–4.6 ~ +4.6 /
0.0
/ 0.1 mm step
]
Scanner Erase Margin
1
Leading Edge
2
Trailing Edge
3
Right Side
012*
4
Left Side
Adjusts the erase margin at each side for scanning.
Do not adjust this unless the user wishes to have a
scanner margin that is greater than the printer margin.
[0 ~ 9.0 /
0.5
/ 0.1 mm/step]
Scanner Free Run
013
Performs a scanner free run with the exposure lamp
on.
Press ON on the touch panel
to start this feature.
Press the
&
(Clear/Stop) key to stop.
White Plate Scanning
1
Start Position
Adjusts the scanning start position on the white plate
for auto shading.
The default is
10.5
mm from the leading edge. The
setting specifies how far scanning starts from the
default position.
[–5.0 ~ +5.0 /
0.0
/ 0.1 mm/step
]
015*
2
Scanning Area
Adjusts the width of the area on the white plate (in the
sub scan direction) that is scanned for auto shading.
The default is
4.76
mm. The current setting specifies
the difference from this default.
[–5.0 ~ +5.0 /
0.0
/ 0.1 mm/step]
APS Data Display
301
Displays the status of the APS sensors and platen/DF
cover sensor
(
☛
4.2.9)
.