GlobalScan
TM
Ver. 2.0
Administrator’s Guide
53
Step 4:
Enter/Edit System Parameters
After you have created a profile (see
Step 2: Add/Edit a Profile
), you can configure the
GlobalScan system. Simply click the
Server System
shortcut or
Parameters
menu link on
the GlobalScan home page. The System Parameters screen appears, enabling you to
establish the general settings to control MFD functionality on the network.
1.
Enter the following information based on your system requirements.
A.
GlobalScan License Type
– This field identifies the type of license under which
GlobalScan is operating, as identified on the CD key which comes with the purchase of
GlobalScan, e.g., (01) Trial, Demo; (05) Permanent [Standalone]; (03) Permanent
[Primary]; or (04) Permanent [Secondary].
Sample CD Key:
JBVTXUI
05
0000085
Note
: Standalone refers to a single GlobalScan Server installation, while primary and secondary reflect
Failover where two GlobalScan Servers are synchronized, allowing a secondary server to automatically
take over should the primary server go down, maximizing uptime.
H
D
B
C
E
F
G
I
J
L
A
K