GlobalScan
TM
Ver. 2.0
Administrator’s Guide
28
Tab
> Email Settings
Cont’d
Ø
SMTP-AUTH
If SMTP-AUTH is selected as your mail system, you must e nter the
following:
1.
Email Server Name
(Server IP address).
Note
: The SMTP port is set to
25, which cannot be changed.
2.
Default Sender Email Address
(the e-mail address to be used if the
logon user’s e-mail address can’t be retrieved during the logon process).
3.
SMTP-AUTH Login Type
(drop-down)
•
SMTP-AUTH Proxy user login
– Users will be authenticated using
proxy information provided in the Proxy User ID and Password fields.
Enter as needed.
•
Shared credentials
(SMTP-AUTH login sync) – If running additional
Services, users will be authenticated using their credentials, but their
IDs and passwords are expected to be the same as other Services
that are to be selected.
Important
: If your SMTP-AUTH Login
Type is shared with, for example, NT
authentication, you then see e-mail as
an available Service to add to a
project. If you choose a project using
Novell authentication, you will not see
e-mail as an available Service.