background image

GlobalScan

TM

 Ver. 2.0 

Administrator’s Guide

 

 

 

46 

 

 

Services 

Tab

 

Cont’d

 

 

B. 

Render (OCR) 

Cont’d

 

 

 

OCR Default Language

: Click this drop-down to select another language. 

 
 
 
 
 
 
 
 
 
 

Note

: The GlobalScan user can override the default language setting by selecting another 

language setting on the MFD “Scan Settings” screen. The default value (chosen above) is 
restored after the user logs out (or after MFD timeout). Also note that the OCR default 
language is only supported by MFDs with GlobalScan Ver. 2.0 firmware. 

 

 

OCR Heartbeat Folder

: Enter the path that links GlobalScan to the OCR 

engine heartbeat folder. This path must match the heartbeat folder path on 
the OCR engine (File Conversion Program screen shown on next page).  

 

 

OCR Heatbeat Interval (minutes):

 This setting informs GlobalScan how 

often to check for the lastest time stamp (of the heartbeat file) created by the 
OCR engine. 

 

What is a Heartbeat?

 A 

heartbeat is a file named 
“heartbeat.dat” located in the 
OCR heartbeat folder generated 
by  the OCR engine (File 
Conversion Program) that 
GlobalScan’s Job Monitor 
Service examines in order to 
determine whether or not OCR is 
up and running. If GlobalScan 
does not see the updated time 
stamp of the “heartbeat.dat” file, 
at the  specified interval, an error 
condition occurs, telling the administrator that OCR is not operational.   

 
Note

: The heartbeat interval set within the profile (above screen) should be greater 

(e.g., 10 minutes) than the heartbeat interval set within the OCR File Conversion screen 
(e.g., 5 minutes), screen on next page.

 

 

Summary of Contents for GlobalScan























































































































Reviews: