background image

i-data Electronic Documentation

ida ReRouter

Installation & Operator’s Guide

Doc. no 60276 Revision 00

WARNING:

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used
in accordance with the instruction manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B
of Part 15 of FCC Rules, which are designed to provide reasonable protection against such inter-
ference when operated in a commercial environment. Operation of this equipment in a residential
area is likely to cause interference in which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.

EMC directive:

This product observes the rules and regulations of the EMC directive. If so required, a declaration of
conformity in local language stipulating the applied rules and regulations can be obtained.

Trademarks:

Company and product names mentioned in this datasheet are trademarks or registered trademarks of
their respective owners. i-data international a-s cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to products and documentation without
prior notification.

The i-data Printing Solutions

ida 

ReRouter

Summary of Contents for ReRouter
















































































Reviews: