Item
Explanation
Fusing Unit
Hot Roller
A worn out hot roller and pressure roller will cause fusing
malfunction, and dirty copies. Replace at regular
intervals.
Pressure Roller
Thermistor
If toner accumulates on the thermistor, fusing
temperature control may not be accurate. Inspect the
thermistor at regular intervals.
Stripper Pawls
Toner or dust adhering to the stripper pawls can cause a
paper jam. Clean or replace the pawls at regular
intervals.
Fusing Entrance and Exit
Guides
Toner piling up on the guide plate will cause a dirty
background on the copy.
Clean the guide plate at regular intervals.
ADF
Transport Belt
A dirty transport belt can leave stains on copies. Clean or
replace the belt at regular intervals.
Pick-up Roller
When dirty, it can cause a paper misfeed, and stains on
the copy paper. Clean this part at regular intervals.
Sorter
Transfer Wheel, Bin Guide
Dust adhering to the transfer wheel or bin guide may
interfere with bin movement and result in uneven bin
positioning. Clean and lubricate these parts at regular
intervals.
- 110 -
Summary of Contents for FT5034
