6. Timing
T1: When the main switch is turned on, the blade solenoid turns on. The blade
releases 15 minutes after the main motor stops.
If the Start key is pressed when the blade solenoid is off, a pressure malfunction
may occur. Consequently, the copier start time is delayed by 0.2 second.
T2: The PCC starts 0.13 second after the Start key is pressed, and it turns off 0.12
second after the fusing exit sensor turns off.
T3: The pick-off pawl solenoid starts 1.49 seconds after the Start key is pressed, and
the pick-off pawls contact the drum. After 1.0 second, the pick-off pawls turn off
and separate from the drum.
Main Switch
Start Key
Blade Solenoid
Erase Lamp
QL/PTL
Bias
T/S
•
PCC
1st Feed MC
Charge Corona
Scanner
ID Sensor LED
Pick-off Pawl Solenoid
Toner Supply Clutch
Fusing Exit Sensor
Lead edge of paper
when the pick-off
solenoid turns on.
Lead edge of paper
when the pick-off
solenoid turns off.
- 79 -
Summary of Contents for FT5034
