Ricoh Caplio 500SE User Manual Download Page 89

Page: 89 / 223

ecord

ing/Pla

ying
Back Sou

To playback sounds, follow the steps below.

Press the

(Playback) button.

• The last shot taken is displayed.

Press the

buttons to select

a sound file for playback
(indicated with a speaker).

• Press the

button to display the next

file.

• Press the

button to display the

previous file.

Press the ADJ. button.

• Playback begins.

The elapsed playback indicator or the elapsed time is displayed on the
screen.

Playing Back Sound

Fast Forward

Press the

button during playback.

Rewind

Press the

button during playback.

Pause/Playback

Press the ADJ. button.

Volume Adjustment

Press the

buttons during playback.

Summary of Contents for Caplio 500SE
































































































































































































































Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands

Ricoh Caplio 500SE, User Manual

Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands