Ricoh Caplio 500SE User Manual Download Page 184

Page: 184 / 223

182

sing
the

GPS F

unct

ion

Press the

buttons to select

the desired destination device.

• If the desired destination device is not

listed, press the ADJ. button to search
for a Bluetooth

GPS unit in your

vicinity.

• Select a destination device and press

the

button to display information

about the destination device.

• To delete a destination device from the list, select the device and press

the

(Delete) button.

Press the MENU/OK button.

• The connection status appears. Pressing the DISP. button cancels the

operation.

• If a passkey is required to connect to the destination device, a

message appears prompting you to enter the passkey. (

P.162)

• If the connection fails, an error message appears and then the

shooting screen appears.

• When a connection is established to a

Bluetooth

GPS unit, the Bluetooth

antenna icon, GPS information and
GPS antenna icon appear on the
shooting screen.

Note ----------------------------------------------------------------------------------------------

The most recently connected destination device appears at the top of the list of
destination devices.

Summary of Contents for Caplio 500SE
































































































































































































































Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands

Ricoh Caplio 500SE, User Manual

Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands