Ricoh Caplio 500SE User Manual Download Page 84

Page: 84 / 223

Va
rio
u

s Sh

oo
ting

Fu
nct
ion
s

To return the Shooting Setting menu settings to their defaults, follow
the steps below.

Turn the mode dial to

Press the MENU/OK button.

• The Shooting Setting menu is displayed.

Press the

buttons to select

[RESTORE DEFAULTS] and
press the

button.

Make sure that [YES] is
selected, and then press the
MENU/OK button.

• The display indicates the camera is

restoring the initial settings. Once it is finished, the display returns to
the shooting mode screen.

Note ----------------------------------------------------------------------------------------------

For a list of functions whose settings are saved when the camera is turned off, see
“Appendices”. (

P.206)

Returning the Shooting Setting Menu

Settings to their Defaults

(RESTORE DEFAULTS)

Summary of Contents for Caplio 500SE
































































































































































































































Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands

Ricoh Caplio 500SE, User Manual

Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands