Ricoh Caplio 500SE User Manual Download Page 25

Page: 25 / 223

If y
ou are u

sing
th
e cam

for t

e f
irst tim

e, read

thi
s sectio

Note ---------------------------------------------------------------------------------------------------

•

For information on switching between the SD memory card and internal memory
during playback, see P.47.

•

Movie and sound recording time and the maximum number of still pictures varies
depending on the capacity of the SD memory card. (

P.203)

•

Before using a new SD memory card, be sure to format it with this camera.
(

P.109)

•

When using an SD memory card previously used with another camera, be sure to
back up any necessary data on the card before formatting it.

Summary of Contents for Caplio 500SE
































































































































































































































Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands

Ricoh Caplio 500SE, User Manual

Search results

Summary of Contents for Caplio 500SE

Reviews:

Related manuals for Caplio 500SE

Brands by name

Popular brands