Ricoh Aficio 2090, Network Manual

Page: 31 / 126

User Tools Menu (System Settings)
23
3
❖ ❖ ❖ ❖
Effective Protocol
Select the protocol to use in the
network.
Note
❒
Default: TCP/IP:Effective, Net-
Ware:Effective, SMB:Effective,
AppleTalk:Effective
❖
❖ ❖
❖
NW Frame Type
Select the frame type when you
use NetWare.
Note
❒
Default: Auto select
❖
❖ ❖
❖
LAN Type
When you have installed the wire-
less LAN board (optional), select
interface, Wireless LAN (IEEE
802.11b) or Ethernet.
Note
❒
Default: Ethernet
❖ ❖ ❖ ❖
Ethernet Speed
Set the access speed for networks.
Select a speed that matches your
network environment. “Auto Se-
lect” should usually be specified.
Note
❒
Default: Auto select
❖
❖ ❖
❖
Host Name
Specify the host name.
❖ ❖ ❖ ❖
Domain Name
Specify the domain name.
Interface Settings/IEEE 1394
Preparation
You must install the IEEE 1394 in-
terface board (optional) into the
machine.
❖ ❖ ❖ ❖
IP Address
When you connect the machine to
a network using the IEEE 1394 in-
terface board (optional), you must
configure the IP address.
Note
❒
Default: Auto-Obtain (DHCP)
❒
When you select [ Specify ] , enter
the IP address and subnet mask
as “xxx.xxx.xxx.xxx”(“x” indi-
cates a number).
❒
To configure the IP address, you
need to enable “IP over 1394”.
❒
If you use the interface for Eth-
ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made with care.
❒
When you use the IEEE 1394 in-
terface on a network, you can-
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for the Sub-
net Mask.
❖ ❖ ❖ ❖
IP over 1394
When you use the IP over 1394
function of the IEEE 1394 interface
to connect the machine to the net-
work, or you print using a person-
al computer with the IP over 1394
driver, you must set IP over 1394.
Note
❒
Default: Active