Ricoh Aficio 2090, Network Manual

Page: 77 / 126

69
9. Appendix
Remote Maintenance by telnet
You can view printer status and con-
figure the network interface board us-
ing telnet.
Note
❒
You should specify a password so
that only the network administra-
tor, or a person with network ad-
ministrator privileges, can use
remote maintenance.
❒
The password is the same as that
used for configuring the network
interface board with a Web brows-
er.
❒
If you change a password with re-
mote maintenance, the other pass-
words are also changed.
Using telnet
The following is a sample procedure
using telnet.
Limitation
❒
Only one person at a time can be
logged on to do remote mainte-
nance.
AAAA
Using the IP address or host name
of the machine, start telnet.
% telnet IP_address
Note
❒
In order to use the host name in-
stead of the IP address, you
must write it to the hosts file.
BBBB
Enter the password.
Note
❒
The default is “password”.
CCCC
Enter a command.
Reference
For more information about tel-
net commands, see p.70 “Com-
mands List”.
DDDD
Exit telnet.
msh> logout
W h e n t h e c o n f i g u r a t i o n i s
changed, a message asks whether
the changes should be saved or
not.
EEEE
Enter “yes” to save the changes,
and then press the
{{{{
ENTER
}}}}
key.
If you do not want to save the
changes, enter “no”, and then
press the
{{{{
ENTER
}}}}
key. If you want
to make additional changes, enter
“return” at the command line, and
then press the
{{{{
ENTER
}}}}
key.
Note
❒
If the “Cannot write NVRAM
information” message appears,
the changes are not saved. Re-
peat the steps above.
❒
The network interface board is
reset automatically when the
settings are changed.
❒
When the network interface
board is reset, the active print
job already sent to the machine
will finish printing. However,
jobs not already sent will be
canceled.