Ricoh Aficio 2090, Network Manual

Page: 30 / 126

Setting Up the Machine on a Network
22
3
*1
When the computer is communicating with the machine using SmartNetMonitor for
Admin by means of IPX/SPX, you can make settings for TCP/IP.
*2
When the computer is communicating with the machine using SmartNetMonitor for
Admin by means of TCP/IP, you can make settings for NetWare (IPX/SPX).
Settings You Can Change with
User Tools
Interface Settings/Network
❖ ❖ ❖ ❖
IP Address
Before using this machine with the
network environment, you must
configure the IP address.
Note
❒
Default: Auto-Obtain (DHCP)
❒
When you select [ Specify ] , enter
the IP address and subnet mask
as “xxx.xxx.xxx.xxx”(“x” indi-
cates a number).
❒
If you use the interface for Eth-
ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made with care.
❒
When you use the IEEE 1394 in-
terface on a network, you can-
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for the Sub-
net Mask.
❒
When you select [ Specify ] , be
sure not to set the same IP ad-
dress as one of the other ma-
chines in the network.
❖ ❖ ❖ ❖
Gateway Address
A gateway is a connection or inter-
change point connecting two net-
works. Configure the gateway
address for the router or host com-
puter used as a gateway.
Note
❒
Default: 000.000.000.000
❖
❖ ❖
❖
DNS Configuration
Make settings for the DNS server.
Note
❒
Default: Auto-Obtain (DHCP)
❒
When you select [ Specify ] , enter
t h e D N S s e r v e r v a l u e a s
“xxx.xxx.xxx.xxx”(“x” indi-
cates a number).
Interface
Settings IEEE
802.11b Communication Mode
❍
-
❍
SSID Setting
❍
-
❍
Channel
❍
-
❍
WEP (En-
cryption)
Setting WEP
❍
-
❍
Encryption
❍
-
❍
Transmission Speed - -
❍
File
Transfer SMTP Server Name
❍
-
❍
Name on the Control Panel
Web
Browser
Smart-
NetMon-
itor for
Admin
telnet