Ricoh Aficio 2090, Network Manual, Page: 38 / 126

Windows Configuration
30
4
Configuring a Windows NT
computer
Install NetBEUI on the Windows NT
computer, and then change the LAN
adapter number (Lana Number).
AAAA
Open [ Control Panel ] , and then
double-click the [ Network ] icon.
Make sure that NetBEUI Protocol
is listed in the
[ Network Protocols ]
box on the
[ Protocols ]
tab.
Note
❒
If NetBEUI is not installed, click
[ Add ] on the [ Protocols ] tab to in-
stall it. For more information
about installing NetBEUI, see
Windows NT Help.
BBBB
Change the Lana Number. Click
the
[ Services ] tab, click [ NetBIOS In-
terface ] in the [ Services ] tab, and
then click [ Properties ] .
CCCC
Click the Lana Number corre-
sponding to the Nbf protocol of
the
[ Network Route ]
headline, and
then click [ Edit ] .
DDDD
Enter “0” as the Lana Number.
Note
❒
If the other protocol's Lana
N u m b e r i s “ 0 ” , y o u m u s t
change the Lana Number to a
number other than “0”.
EEEE
Click [ OK ] .
FFFF
Click
[ Close ]
, and then close the
[ Network ] dialog box.
GGGG
After checking the message to re-
start, click
[ Yes ] .
Note
❒
After you change the Lana
Number, you must restart the
computer.