Ricoh Aficio 2090, Network Manual, Page: 19 / 126

Confirming the Connection
11
2
Using the IEEE 802.11b
(Wireless LAN)
AAAA
Make sure the LED of the IEEE
802.11b card is lit.
❖
❖ ❖
❖
When using in Infrastructure Mode
1.
If the IEEE 802.11b card is work-
ing, it is lit in orange. If the IEEE
802.11b (wireless LAN) is not select-
ed, it does not light, even if the ma-
chine power is on.
2.
If it is connected properly to a net-
work, the LED is green in infrastruc-
ture mode. When the LED is blinking,
the machine is searching for devices.
❖ ❖ ❖ ❖
When using in Ad hoc Mode/802.11
Ad hoc Mode
1.
If the IEEE 802.11b card is work-
ing, it is lit in orange.
2.
If it is connected properly to a net-
work, the LED is green in ad hoc
mode or 802.11 ad hoc mode. When
the LED is blinking, the machine is
searching for devices. The LED will
light after a few seconds.
BBBB
Print the configuration page to
verify settings.
Reference
For more information about
printing a configuration page,
see
Printer Reference 2 .
Checking the Machine's Radio Wave
Status
You can check the machine's radio
wave status using the machine's con-
trol panel.
Infrastructure Mode
AAAA
Press the
{{{{
User Tools
}}}}
key.
BBBB
Press [ System Settings ] .
CCCC
Press
[ Interface Settings ]
.
DDDD
Press [ Network ] .
EEEE
Press [ LAN Type ] .
FFFF
Select [ IEEE 802.11b ] , and then
click
[ OK ]
.
GGGG
Press [ IEEE 802.11b ] .
HHHH
Press [ Communication Mode ] .
IIII
Select [ Infrastructure ] , and then
click [ OK ] .
JJJJ
Press [ Wireless LAN Signal ] .
The machine's radio wave status is
displayed.
ZGDH600J
1
2
ZGDH600J
1
2