Ricoh Aficio 2090, Network Manual

Page: 108 / 126

Appendix
100
9
IEEE 802.11b current channel <Channel> The current channel is displayed.
The value chosen by the user is displayed in
Ad hoc mode.
The channel used in the access point is dis-
played in Infrastructure mode.
(Example: Current channel is 11.)
IEEE 802.11b current channel 11
IEEE 802.11b Card Firmware REV. <Version> Wireless LAN Card Firmware version.
(Example: Current version is 0.8.3.)
IEEE 802.11b Card Firmware REV. 0.8.3
IEEE 802.11b MAC Address = <MAC Ad-
dress> The IEEE 802.11b I/F MAC address is dis-
played.
(Example: Current MAC address is
00:00:74:XX:XX:XX.)
IEEE 802.11b MAC Address =
00:00:74:XX:XX:XX
IEEE 802.11b SSID <ssid> (AP MAC Address <
MAC Address>) The access point SSID used in Infrastructure
mode and the MAC address of the access
point are displayed.
(Example: Current MAC address is
xx:xx:xx:xx:xx:xx and SSID value is “test-
ssid”.)
IEEE 802.11b SSID test-ssid (AP MAC Ad-
dress xx:xx:xx:xx:xx:xx)
IEEE 802.11b Tx Rate <Transfer Speed> The IEEE 802.11b transmitting speed (set
speed) is displayed.
(Example: Current Tx Rate is 11Mbps.)
IEEE 802.11b Tx Rate 11Mbps
Transmission speeds vary depending on sig-
nal quality. Displayed values may differ from
actual transmission speed.
inetd start. An inetd has started.
<interface> started with IP: <IP address> <IP address> has been set for <Interface> and
<Interface> started.
<Interface>: Subnet overlap. Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
of another interface.
Set Subnet so it does not overlap with another
interface.
IPP cancel-job: permission denied. The printer could not authenticate the name of
the user attempting to cancel a job.
ipp disable. Printing with ipp is disabled.
ipp enable. Printing with ipp is enabled.
Messages Causes and Solutions