Revo R4-8-16DVR2, User Manual

Page: 75 / 109

Netcon (Remote Administration System)
19
NOTE: The DVRNS server cannot be configured when using modem connections. Refer to
Appendix – DVR Name
Service (DVRNS)
for more details on DVR Name Service.

Startup Settings
: Select whether or not to reselect a language when Netcon starts or select whether or not to run
Netcon automatically when logging onto Windows.
Remote Site: Configures the connection list for remote access.

Add
: Click the
Add
button and enter the information about the remote site you want to add.
– Reference Group
: The site should be assigned to a
Reference
Group
for effective management of multiple remote sites. Click
the
Add
button to create a new reference group.
– Device Setup
: Select the system of the remote site to register. When
registering an IP camera, select
IP Camera
.
– Remote Site Setup
: Select
PC Based DVR
when registering a
DVR at the remote site that is PC based. Enter a site name and the
IP address of the remote site (modem telephone number for dial-up
connections), acquired from your network administrator. Click the
Port…
button to set up the IP port number of each program. The IP
port number should match the value set during the network setup
of the remote DVR. If the remote system version does not allow
you to set the IP port numbers, use the following values: “
8200
”
for
Admin
, “
8016
” for
Watch
, “
10019
” for
Search
, and “
8116
”
for
Audio
. Select the number of cameras at the remote site. For
example, selecting “8” from the list when registering a 16-channel
DVR displays video of the first 8 channels on the screen.