Revo R4-8-16DVR2, User Manual

Page: 28 / 109

User’s Manual
20

Post-Event Record Dwell
: Set the length of time you would like to record for the associated event.

Add Schedule…
: Adds a schedule item. Up to 20 schedules can be registered.
No.
– Indicates a schedule number. The higher the number, the higher its priority.
Day
– Select the days that the recording will take place.
Range
– Set the time range that the recording will take place.
Mode
– Select the recording mode. ( : Time (Time-lapse) recording, : Event recording, : Time & Event recording)
Channels
– Select which cameras will be recorded.
Settings
– Set the ips, Quality and Dwell of the recording for the selected recording mode in the Mode column. If you do
not set the Settings column, the DVR will follow the default settings. See below for details.
– Deletes the recording settings.

Default
: Set the default settings of ips, Quality and Dwell for Time and Event recording.
EVENT SETUP
Motion Event Settings (EVENT

Motion Tab)

No.
: Your DVR has built-in motion detection. Selecting the
box turns the motion detection On and Off for each camera.

Sensitivity
: Set the DVR’s sensitivity to motion for Daytime and Nighttime independently
from
1
(the least sensitive) to
5
(the most sensitive).

Zone
: Define the area of the image where you want to detect motion; e.g., a doorway. The Motion Detection Zone
screen is laid over the video from the selected camera. You can set up motion zones one block at a time in groups
of eight individual block groups. A block group is positioned within the image area using the arrow buttons on the
remote control, and individual blocks within the block groups are selected or cleared using the camera buttons. You
can set up motion detection zones by selecting or clearing blocks. You can select or clear eight individual blocks
in a group at a time, and individual blocks within the group are selected or cleared by using the camera buttons on
the remote control. Pressing the
button on the remote control or clicking the right mouse button displays the
menu screen. Each item in the menu has the following functions;