Revere Coastal Commander 2.0, Service Manual

Page: 118 / 170

October 7, 2016
8 - 22
Assembly
9120
FIGURE 16 – VACUUM CLIP ATTACHMENT
10. Before sealing the vacuum bag, be sure the raft is secure inside.
11. Heat seal open top of bag leaving an approximately 2in. open gap near the corner. Be sure there
are no gaps in the sealed area or bag will not vacuum properly. (See Fig. 17)
FIGURE 17 – SEAL VACCUM BAG
12. Insert vacuum hose into the open gap in the bag until it is positioned inside the folds of the raft.
Evacuate the bag while maintaining constant pressure on the raft to condense it as much as
possible. (See Fig. 18)