Revere Coastal Commander 2.0, Service Manual

Page: 115 / 170

October 7, 2016
9120
Assembly
8 - 19
3. For the Commander rafts, leave the mooring line exposed with enough length available on outside
of the raft to attach to vacuum bag. Fold the back side of the raft over top the front side. Make
sure the fold as close to the cylinder valve as possible. (See Fig. 13C)
FIGURE 13C – FOLD STEP 3
4.
Starting at the end of the raft nearest the cylinder, fold the raft once inwards. The fold should be
approximately ¼ the length of the folded raft. Be sure the end of the mooring line protrudes
from the folded raft edge. (See Fig. 13D)
FIGURE 13D – FOLD STEP 4