Revere Coastal Commander 2.0, Service Manual

Page: 109 / 170

October 7, 2016
9120
Assembly
8 - 13
RE-ARMING THE OPERATING HEAD
FIGURE 7 – OPERATING HEAD
1.
Screw threaded knurled collar on rearming device onto the bottom of the operating head.
2.
Position inflation cable at the top of the operating head and hold in place while turning knob on
rearming device.
3.
Continue turning knob until bayonet is completely retracted and inflation cable is securely in place.
4.
Cover inflation cable with red valve cap and snap in place.
5.
Remove rearming device by unscrewing it from the base of the operating head.
6.
If needed, replace inflation valve gaskets on each of the outlets on the operating head.
STORAGE
1. Store in a cold, dry room, free of corrosive fumes with the diffuser cap fitted.
2. Newly charged cylinders must be check weighed after 7 days. If the weight varies by more than
10g (0.02lbs) the cylinder will need to be emptied and refilled.
Caution: Never store charged cylinders without diffuser caps.