Revere Coastal Commander 2.0, Service Manual

Page: 114 / 170

October 7, 2016
8 - 18
Assembly
9120
FOLDING AND PACKING
1. Spread out the liferaft on the packing surface. Place boarding ladder on top of deflated raft.
(See Fig. 13A) For the Cruiser rafts, tie the end of the painterline near the inflation line to the
patch on the front, right side of the raft. Leave the painterline sachet outside of the liferaft for the
remainder of the folding.
FIGURE 13A – FOLD STEP 1
2. Fold the raft starting with the front being sure to get the fold crease as close to the cylinder valve
as possible. Fold as tight as possible to top of cylinder valve. (See Fig. 13B)
FIGURE 13B – FOLD STEP 2