58
1x dome assembled previously (not shown in the picture)
1x front plate
A2
4x cylinder head screws M3x12
4x screw nuts M3
Please note! The screws and nuts are depicted slightly
bigger.
Insert two screw nuts into each of the remaining, sloped front side of
the two side plates.
Remove the protective film on both sides in the respective areas. Fa
-
sten the front plate with 4 M3 cylinder head screws as shown in the
pictures.
The front plate must be aligned in such a way that the cut-out for the
display is on the left (in front view).
The dome is now completely assembled. At the end, tighten all previously inserted screws well.
